ExcelPTZ PTZ605 series Manuál s instrukcemi stáhnout pdf (Strana 22)

dipswitches on the rear of the unit. Note that all PTZ domes controlled by this keypad must have identical protocol and

baud rate settings. The manual supplied with the keypad will show you what these settings should be.

Next connect the RS485 connections from the dome/s ensuring that the A and B lines are connected correctly.

Finally connect the power supply. Both the PTZ730 and PTZ700 keypads require a 12V DC PSU (500mA minimum).

It is recommended to use a POW800 for this purpose. Now press the keypad ON button.

Select a PTZ camera by pressing CAM button followed by camera address and Enter*. The LCD display will indicate

the camera channel selected. CAM 01 indicates that the keyboard is ready to talk to camera with address 1, if you have

another dome set at camera address 2, press CAM button followed by 02 and Enter. This would change the display

screen to CAM 02.

If you have multiple domes you will need to change the address of each dome so they are different but PLEASE

LEAVE THE DOMES ON PELCO-P/D 2400 BAUD RATE.

* see NOTE 2 above.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 57 58

Žádné komentáře

ExcelPTZ PTZ605 series Manuál s instrukcemi Strana 22